'U' & 'V' Notch Broaches
   

U and V notch broaches are same as the key-way broaches except that they are used to cut the notches in U and V shapes on the external surfaces. .
   

SIX INTERCHANGEABLE BROACHES ARE AVAILABLE :
   
'V' Broach Suitable for lzod and Charpy 10 mm.
Broach length - 356mm square and lzod 0 450" dia. specimens
   
'V' Broach Suitable for Izod and Charpy 10 mm.
Broach length - 241mm square specimenss only.
   
'U' Broach Suitable for Charpy 10 mm. square
Broach length - 394mm specimens - 'U' notch 3 mm. deep.
   
'U' Broach Suitable for 10 mm. square specimens
Broach length - 394mm DVM FORM - 'U' notch 3 mm. deep.
   
'U' Broach Suitable  for 10 mm. square specimens
Broach length - 311mm MESNAGER FORM - 'U' notch 2 mm. deep
   
'U' Broach Suitable for 100 mm. square specimens
Broach length - 311mm VSM FORM - 'U' motch 2.5 mm. deep.
   

THE APPROPRIATE REFERENCE NUMBER SHOULD BE QUOTED WHEN ORDERING BROACHES.
 

 


 
 

NOTCH BROACHING MACHINE

Suitable for Ferreous
& Non - Ferreous Materials

For Production of 'V' & 'U' Notches in
IZOD and Charpy
 

 

 

 

   
 
BACK

NEXT